Epoxy sand feeling sealant

  Scope of application:

  Caibel epoxy sand feeling sealant is a high performance, dual component, neutral cure,sand feeling,100% epoxy sealant designed for ceramic tile & stone appications.

  Uses:

  Exterior and interior use. Joints for ceramic tile & stone applications. Expansion joins in residential andcommercial applications Main functions: easy to clean, mouldproof, moisture-proof, anti-shedding, anti-color change.

  Instruchions:

  Clear the slotted, confirm there is no water and dust gap slag. Unscrew pipe head nut, allocated the plug, plug in mixing tube, put the tubes into glue gun Upwords spearhead, pushed the air out (still glue out), push 60 CM length abandoned , ensure AB sealant mixed enougn. Fill the sealant along the slotted, make sure the mouth

of the mixing tube be less than the gap width . Using a dedicated preasure iron bell scrape along the seam with preasure, make glue and gap bonding. Basic curing affer 12 hours, with a shovel knife to sealant on both sides of the seam , pure bright after 24 hours, such as porcelain.

  Attentions:

  In winter or low temperature area , put thetube in hot water up 60 over 20 minutes to soften colloid before using. If using processbreakmorethen20minutes, colloidsolidification occur, please change the mixing tube. If the glue does not use up after finish, please clear the mixing tube. replace mixing tube when use again. You may fill directly on polished tile and shining glaze the pts main wax on the both side of seam before filling glue if the product using with antique , meat-finish or ceramic wall for easy cleaning. The products are top A grade . strictly implement the intemational leading technol ogystandards.But in special conditions (such as base material, climate, using method), should be tested in advance, to ensure compliance with specific purpose us and satisfied effect can use large area , the comparing cannot be liable for any loss of improper using。